Parriott31 Posted March 6, 2015 Report Share Posted March 6, 2015 (edited) ok before i start getting burnt on the cheap build part. I want you to know I have seen with my own eyes an ls1 camaro run low 11's with the on 3 performance truck kit of coarse modified to fit. So here is my list: 99-06 truck turbo system. On 3 performance trans is a built patc raptor, After turbo install i will be saving for a flt level 7 torque convertor, need to upgrade thinking for a 2800k - 3000k stall ? Cam and heads, cam is a g5x3 by Gigliotti but im running stock rockers. heads are stock ported and polished. I need fuel, should i get the kit in the link below my post? or shoot for a walbro 255 or a frame mounted kit. injectors are just as bad. should i go with the kit or look for a 55# injectors else where problem is this stuff is cheap. really cheap. good reviews on the simmens deka 60# any one have a part number im confused on long/short and the connector type. http://www.on3performance.com/shop/1999-07-chevygmc-15002500-truck-turbo-system/ Next they offer upgraded maf why? Why a map sensor other than a guage? pcm cant read a map as far as i know. I can get the tuning close with hp tuners but i will need to find an awd dyno and a respectable tuner to get it right pita.... Edited March 6, 2015 by Parriott (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.